Mössbauer spectroscopy Totally Explained

Everything about Mossbauer Spectroscopy totally explained

Mössbauer spectroscopy is a spectroscopic technique based on the Mössbauer effect. In its most common form, Mössbauer Absorption Spectroscopy, a solid sample is exposed to a beam of gamma radiation, and a detector measures the intensity of the beam that's transmitted through the sample, which will change depending on how many gamma rays are absorbed by the sample. The atoms in the source emitting the gamma rays are the same as the atoms in the sample absorbing them. As can be explained through the Mössbauer effect, a significant fraction of the gamma rays emitted by the atoms in the source don't lose any energy due to recoil and thus have almost the right energy to be absorbed by the target atoms. The gamma-ray energy is varied by accelerating the gamma-ray source through a range of velocities with a linear motor. The relative motion between the source and sample results in an energy shift due to the Doppler effect. In the resulting spectra, gamma-ray intensity is plotted as a function of the source velocity. At velocities corresponding to the resonant energy levels of the sample, some of the gamma-rays are absorbed, resulting in a drop in the measured intensity and a corresponding dip in the spectrum. The number, positions, and intensities of the dips (also called peaks) provide information about the chemical environment of the absorbing nuclei and can be used to characterize the sample.
In order for Mössbauer absorption of gamma-rays to occur, the gamma-ray must be of the appropriate energy for the nuclear transitions of the atoms being probed, which is almost always achieved by having the same atoms of the same isotope in both the source and the target. Also, the gamma-ray energy should be relatively low, otherwise the system will have a low recoil-free fraction (see Mössbauer effect) resulting in a poor signal-to-noise ratio. Only a handful of elemental isotopes exist for which these criteria are met, so Mössbauer spectroscopy can only be applied to a relatively small group of atoms including: ⁵⁷Fe, ¹²⁹I, ¹¹⁹Sn, and ¹²¹Sb. Of these, ⁵⁷Fe is by far the most common element studied using the technique.

Mössbauer spectrometers

A Mössbauer spectrometer is a device that performs Mössbauer spectroscopy, or a device that uses the Mössbauer effect to determine the chemical environment of a sample. Dr. Göstar Klingelhöfer at the Johannes Gutenberg University in Mainz, Germany, developed a miniature Mössbauer Spectrometer, named (MB) MIMOS II, that was used by the two rovers in NASA's Mars Exploration Rover mission.

Further Information

Get more info on 'Mossbauer Spectroscopy'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://m__ssbauer_spectroscopy.totallyexplained.com">Mössbauer spectroscopy Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.